Customer Reviews for VEVOR 24 Inch Tile Cutter Single Rail Double Brackets Manual Tile Cutter 3/5 in Cap w/Precise Laser Manual Tile Cutter Tools for Precision Cutting

Absolutely great it sliced through my 60 x 60 floor tiles with ease can’t fault it at all , my tiles were porcelain which I was not sure would work but it did them perfectly. Would certainly recommend

1500 sqr ft entry custom home,very straight cuts,great price

Jederzeit wieder

Yes this is perfect tile cutter.

Arrived really quickly and packed well. We used this to cut 1200 x 600mm porcelain tiles and it made the job so easy. We had no incorrect cuts. The laser line made it really easy to get an accurate even cut, didn’t realise it had this when purchased and so pleased it did. Wouldn’t hesitate to recommend this product.

Used to snap 600mm x 10mm porcelain tiles and worked really well, lazer guide was a bonus, lighter than my old one and far superior.

Good price compared to others on the market, good build quality and works well. No issues so far on 9mm thick large format porcelain tiles.

The scoring wheel supporting rails aren't perfectly rigid and as you move the scoring wheel along the rail it deviates from the supposed straight line and the cut line is curved in the middle

Fantastic 47in cutter! The rail is solid and doesn't flex at all; it's light enough to lift around. I had worried that paying £125 rather than £600 may mean poor quality but that is not the case. I tiled an 10' x 6' en-suite with 4' x 1.5' tiles without a single problem. My one minor struggle was trying to align the laser accurately. I found that very small movements in the adjustment screw resulted in quite large swings. I ended up using it to roughly align the tile and then used the cutting wheel moved above the marks on the tile to make fine adjustments.

Polecam