Customer Reviews for VEVOR Manual Wire Stripping Machine, 0.06''-1.57'' Copper Stripper with Hand Crank or Drill Powered, Visible Stripping Depth Reference, Portable Aluminum Frame Wire Peeler for Scrap Copper Recycling

Item seems good, first try of the stripper and it cuts well at a consistent depth. Easy to set up and use.

Works well, using it to strip twin and earth and then the separate wires. Also cuts the inner sheath on armoured cable.

Does exactly what is says and strips wire quickly and efficiently once you get the knack. Keep the blade as high as possible so you cut the shield but not the copper cable to preserve blade life

Very good piece of machinery stripped the cable with ease good value for money delivered in very good time and very sturdy and well designed piece of machinery

Great little stripper,Saves alot of time sorting the cable into sizes, so you font have to keep adjusting the cutting wheel.I took one nut of the handle to be able to get the wheel lower for the really small cable,

Takes a little practice to get adjustment and technique right. Found it too difficult to coordinate when powering with drill. Slow hand cranking and feeding/guiding wire in by hand worked best for me on 1.5mm sq to 6mm sq with 3-hole gate removed. No doubt that with increasing use and trial and error I will get the best out of this machine. Hoping Vevor may come up with a re-sharpening gadget for the blade or offer spare blades?

fast delivery, arrived on time, works great, first class unit, I looked at many other units but none match up as your site. well pleased.

This little machine has made stripping cable so easy compared to doing it manually. Once you get used to how it work it's a doddle and will pay for itself very quickly. I have stripped cable with this in 4 hours that would have taken me days to do. Don't think about it "BUY IT"

I bought this machine as I was accumulating a bit of cable from my job and stripping it by hand, as you can imagine it started to build up faster than I was stripping it. At the price I paid I wasn't holding a lot of hope for it if I'm honest.....I was wrong, this thing is amazing if you are, like me, a part time scrap collector. A lot less messy than stripping with a knife too. Fully recommended!.....although, a spare blade or 2 would be a good addition.

The best machine ever used to cut. Easy to maintenance, make sharp, and clean. Fully safety. Price worthed. Highly recommended. Thank you.