The saw mill is solidly constructed and works as expected in cutting planks of wood. However there are some reservations:
1 - The maximum cutting width with a Stihl chainsaw with 16" bar is only 10.5"
2 - With a 16" bar, the perspex cover had to be cut down (a 1" V grove cut into the end) otherwise the bar could not be clamped
3 - With the 16" bar, the handle cannot be fitted unless the perspex cover is cut down by a further 2"
4 - The markings on one of the vertical depth adjustment bars are on the wrong side so cannot be used. The depth has to be measured instead, which is less convenient. The bar was obviously welded the wrong way around.
5 - The U bolts are too long and have to be cut down otherwise they obstruct the chainsaw
Alex P 
